Fully automated small Factory - From Sand to Florinol blueprint layout

Sandustry Wiki/Blueprints/Fully automated small Factory - From Sand to Florinol

Imported, not independently tested · Not stated by the source · Community submission

Fully automated small Factory - From Sand to Florinol

Connect the Pipes and fill the Lava into the reservoirs and you are ready to go!

Sourcing & Verification

Blueprint string reproduced byte-for-byte from community submission #76 on sandustryvault.com and published verbatim. We have not re-tested it in our own save. Footprint, power draw and throughput are not published by the source, so we do not state them.

Design Intent & Problem Solved

Connect the Pipes and fill the Lava into the reservoirs and you are ready to go! In the water reservoirs the upper vents are connected to the pump and the lower vents are for fresh water. Lava is required: - below the Shakers in the Filters with a height of 4 (x13) - in the heat collector with a height of 3 (x7 each - x8 collectors) - below the dryers with a height of 1 (x3) - next to the dryers with a height of 4 (x2)

Layout Render from the Original Submission

● Source layout render 9539 char string 10 machine types
Fully automated small Factory - From Sand to Florinol layout render from the original community submission
Drag to pan · Scroll to zoom · Render published with the original submission on sandustryvault.com

Layout Evidence & In-Game Captures

Fully automated small Factory - From Sand to Florinol community layout render
Layout render published with the original community submission #76 on sandustryvault.com.

Machinery & Source Data

Machinery Types in the Payload

  • Filter Wall
  • Clearing Frame Left
  • Thermal Relay
  • Thermodryer
  • Heat Cannon Left
  • Thermofroster
  • Kinetic Field Emitter Up Left
  • Snowmaker
  • X
  • H

Community Adoption

  • 143 in-game copies reported
  • 9539 character string

Reported Footprint & Power

  • Footprint: not published by the source
  • Power draw: not published by the source

Safe Placement & Cold-Start Checklist

  1. Place the module in open space with 2-block perimeter clearance before connecting production lines.
  2. Confirm research prerequisites, conveyor speed match, and liquid drop-pipe heights.
  3. Leave an inspection gap so any blocked Shaker or mineral slurry overflow can be drained safely.
  4. Verify power grid capacity satisfies the initial startup spike before feeding raw ore.

⚠️ Known Failure Modes & Anti-Clog Safeguards

Not reproduced in our own save yet, so no failure modes are confirmed here. Check the linked original submission for any notes from the author.