Florinol Maker blueprint layout

Sandustry Wiki/Blueprints/Florinol Maker

Imported, not independently tested · Not stated by the source · Community submission

Florinol Maker

Takes Amathalis in a hopper on the top and outputs Forinol and Gold out the left side.

Sourcing & Verification

Blueprint string reproduced byte-for-byte from community submission #77 on sandustryvault.com and published verbatim. We have not re-tested it in our own save. Footprint, power draw and throughput are not published by the source, so we do not state them.

Design Intent & Problem Solved

Takes Amathalis in a hopper on the top and outputs Forinol and Gold out the left side. Buckets under each segment need a 1-2 pixel layer of lava added to generate the steam. All liquid vents are water inputs and the pumps bottom left are to pick up the Florinol with a conveyor to carry away the gold. Thermal buffer line out the bottom left is for feeding heat in from a lava pool for the burners. Its almost self sufficient when running but if the input runs dry, the burners will use up the residual heat Can be tiled by moving the bottom one down and copying the top 3 segments It self regulates as the teleporter blocks will get restricted when Florin builds up, which will cause the Amathalis to pile up and flow into the next level

Layout Render from the Original Submission

● Source layout render 3539 char string 10 machine types
Florinol Maker layout render from the original community submission
Drag to pan · Scroll to zoom · Render published with the original submission on sandustryvault.com

Layout Evidence & In-Game Captures

Florinol Maker community layout render
Layout render published with the original community submission #77 on sandustryvault.com.

Machinery & Source Data

Machinery Types in the Payload

  • Thermodryer
  • Conveyor Right Mk 2
  • Conveyor Left Mk 2
  • Thermal Relay
  • Quantum Portal Exit
  • Quantum Portal
  • Heat Cannon Left
  • Filter Wall Mk 2
  • Snowmaker
  • Thermofroster

Community Adoption

  • 360 in-game copies reported
  • 3539 character string

Source Tags

  • florinol
  • amathalis
  • gold

Reported Footprint & Power

  • Footprint: not published by the source
  • Power draw: not published by the source

Safe Placement & Cold-Start Checklist

  1. Place the module in open space with 2-block perimeter clearance before connecting production lines.
  2. Confirm research prerequisites, conveyor speed match, and liquid drop-pipe heights.
  3. Leave an inspection gap so any blocked Shaker or mineral slurry overflow can be drained safely.
  4. Verify power grid capacity satisfies the initial startup spike before feeding raw ore.

⚠️ Known Failure Modes & Anti-Clog Safeguards

Not reproduced in our own save yet, so no failure modes are confirmed here. Check the linked original submission for any notes from the author.