Gas · Energy chain
Florin belongs to Sandustry's documented energy route. Treat it as a gas that needs to be condensed into Florinol before a Florinol Battery can store the result.
Quick answer
This is a Thermal Relapse, not a bug. Florin gas reverse-condenses if it cools too fast in open environments or cold biomes. To fix this, keep your Condenser within 3-4 tiles of the Steam Dryer, use an enclosed Pipe, and rely on downward vertical drops instead of lateral fans.
01
Florin is a lightweight, buoyant gas generated by applying heat to Dried Amethelis. Because it naturally drifts upward toward the sky, open-air setups will lose gas rapidly to the atmosphere. Altitude itself does not affect the reaction, but buoyancy causes rapid open-sky escape.
To prevent gas loss, build an enclosed airtight ceiling chamber directly over your Steam Dryers and route continuous overhead pipes into a Condenser.
02
Players frequently mistake Florin gas turning back into solid Dry Amethelis before reaching the Condenser for a bug. This thermal relapse occurs when the gas cools too rapidly in an open environment, cold biome, or uninsulated area.
To prevent reverse condensation, ensure the Pipe connecting the Steam Dryer and Condenser is completely enclosed (no open tile gaps) and does not exceed 3-4 tiles in length.
The optimal gravity feed layout places the Condenser directly below or adjacent to the Steam Dryer. Use downward vertical drops instead of lateral fans to prevent clogging.
03
Batteries cannot accept raw gas. Feeding Florin into a Condenser transforms it into chemical Florinol liquid, which is then pumped into Florinol Batteries for high-capacity energy storage.
When a Florinol Battery drains to zero charge, solid Florinol Soil forms inside the casing, preventing new liquid intake until cleared with fire or excavation.
Questions answered
Florin Gas is buoyant and will float upwards into the atmosphere. Always capture it in an enclosed chamber with ceiling pipes leading straight to a Condenser.
Yes. Community testing (19-upvote thread, u/wearing_moist_socks; 15-upvote thread, u/Modhopper) confirms that Florin Gas processed at high altitude reverts to Dry Amethelis before reaching the Condenser. The reversion happens at the same atmospheric altitude layer where Steam turns back into rain. If your Florin line is losing gas before the Condenser, move the Steam Dryer, heating setup, and Condenser lower in the world. One player fixed the issue by shifting the entire route down roughly 20 blocks.
Florin Gas is condensed into liquid Florinol, which serves as the chemical electrolyte for charging Florinol Batteries and synthesizing endgame Aurixite crystals.
Batteries cannot intake raw gas. Florin Gas must first pass through a Condenser to become liquid Florinol before it can be piped into a Florinol Battery.
Florinol Soil is the solid byproduct left inside a Florinol Battery once its stored energy is depleted. It blocks the battery from accepting fresh Florinol. Clear it by digging or igniting it: flame spreads instantly across adjacent Florinol Soil tiles, rapidly incinerating the residue so the battery recharges.
Evidence notes
These are useful player examples, not official specifications.
